Ultralight Rain Mitts by High Tail Designs


Color: White Topo (GGG exclusive)
Size: Small/Medium
Price:
974 kr

Description

Ships in 1-2 Business Days | Based in Philadelphia, PA | Est. 2018

GGG exclusive Topo prints!

Perfect for cold, rainy stretches, the Ultralight Rain Mitts keep your paws dry. Warm also, when used with a liner glove. High Tail Designs recommends lightweight Possum-down gloves.

Using Dyneema® Composite Fabric in conjunction with Dyneema® Hybrid Fabric, these mitts are super lightweight at about one ounce for a pair, but surprisingly abrasion-resistant in the palm, where your hands will be in contact with trekking poles. These are a must for cold-weather trips or if you're expecting rain, sleet or snow.  

Features:

  • Extremely Water-Resistant (as close to waterproof as you can get without welded seams)
  • Abrasion-Resistant Palm (to prevent deterioration while using trekking poles)
  • One-handed wrist cinch fastener to tighten/loosen each mitt
  • Fully-Taped Seams
  • Large glove pull on each mitt for ease of donning
  • Shock cord wrist cinch to prevent water ingress
  • Loops for attaching mitten hooks
  • Unique Colorways
  • Ultralight Construction

Note: These mitts are meant to go over liner gloves. They will work without them but are much more comfortable & warm if using a liner glove and may fit a little large if not using liners. 

_______________________________________________

Specs:

Sizing: Measure from the base of your palm to the tip of your middle finger. This is the base measurement used for sizing.

Small/Medium:

  • Dimensions: ~11.4"L x 7.4"W
  • Fits: 6.5"-7.75" base measurement

Weight: 1.07oz | 30g

Large/X-Large:

  • Dimensions: ~12.2"L x 7.5"W
  • Fits: 7.5"-8.25" base measurement

Weight: 1.21oz | 34g

    Materials:

    • Main fabric: Sublimated 1.0 oz/sqyd Dyneema® Composite Fabric
    • Palm fabric: Sublimated 2.92 oz/sqyd Dyneema® Hybrid Fabric
    • Components: 3M 9485pc Dyneema® Tape, 1/8" Shock Cord, 1/2" Firm Nylon Grosgrain Ribbon, 2mm Spectra Glove Pull, Cord Toggle, Cord Pull

    Made in the USA

    _______________________________________________

    Care Instructions: Clean dust and dirt from mitts before storing. Store out of direct sunlight and moisture. Hand wash with a gentle soap. Do not iron. Do not wring. Drip-dry in shade. Do not bleach.

    You may also like

    Recently viewed